How to Fix A Plug

How to Fix a two-pin plug (no ground): usually a single body with the cable and can not be repaired. It will, in this case, replace the entire cable, plug included.

How to Fix a three-pin plug (ie, connected with the ground): You can disconnect it and replace it.

The repair is performed as follows:

• Removes the screw terminal blocks internal and removed the plug.

• If a thread is released from the terminals of the pins, peel the tip and re-positioned, tighten the little screw. If the plug appears sunburned should remove and replace.

• Cut the string and peel the drivers.

• are inserted from behind the body of the plug and then blocked at the terminals of the pins, taking care to place the yellow-green wire (ground) in center.

• the thread is blocked on allocation to terminal plug, which serves to prevent a tug on the wire is transmitted to the pins.

• It puts everything in the body of the plug and block with the screw (or screws) external.

Precautions to keep in mind when learning how to fix a plug:

• Never remove the plug from the socket by pulling the thread.

• Take a tour of the house with some regularity and examine all outlets, it is likely that one is damaged and requires repair (plugs naked, poor blocking, etc.).. Should acquire other outlets are in order and replace them.